UPOL Dolphin Glaze 440ML Polyester Stopper

U-POL Dolphin Glaze Fine Finishing Filler is a premium, technically advanced finishing glaze formulated to eliminate pinholes and surface imperfections before painting. Its self-levelling formulation provides a smooth, ultra-fine finish that requires minimal sanding, ensuring a flawless base for topcoating.

Key Features:

• Pinhole Resistant: Effectively fills minor imperfections such as pinholes, scratches, and stone chips.

• Excellent Adhesion: Adheres well to various substrates, ensuring a strong bond.

• Easy to Sand: Sands effortlessly to a smooth finish.

• Self-Levelling: Provides a smooth, ultra-fine finish with minimal effort.

• Semi-Flexible: Accommodates slight movements in the substrate without cracking.

Suitable Substrates:

• Direct to metal

• Prepared OEM paint surfaces

• Aluminium

• Galvanized steel

• SMC (Sheet Moulding Compound)

• Fiberglass

• Lightly abraded E-coat

• Most plastics

Application Guide:

1. Surface Preparation: Clean and degrease the surface. Abrade the surface with appropriate grit paper (P80 for bare steel, P180 for original paint, and P180 for GRP). Re-clean and dry the surface.

2. Mixing: Mix thoroughly on an Onion Board Mixing Palette. Follow the mix ratio carefully. Do not under or over-catalyse.

3. Application: Apply with a pressing action to reduce air entrapment.

4. Drying: Allow to flash off for 10–15 minutes between coats. Sandable at 20°C after 15–20 minutes; at 30°C after 15 minutes.

5. Sanding: Dry sand with P180–P240 for a smooth finish.